HD Source
Sony HDC-3100 Three 2/3-inch CMOS Sensors for Fibre Operations
Sony HDC-3100 Three 2/3-inch CMOS Sensors for Fibre Operations
Regular price
$999,999.00 CAD
Regular price
Sale price
$999,999.00 CAD
Unit price
/
per
SKU:HDC3100VFPAC
General
Power requirements
AC 240 V, 1.05 A (max.), DC 240 V, 1.05 A (max.)
Operating temperature
.20°C to +45°C (.4°F to 113°F)
Storage temperature
.20°C to +60°C (.4°F to 140°F)
Mass
Approx. 4.8 kg (10 lb 9 oz)
Imager
Imager
2/3 inch type CMOS sensor with global shutter
Method
3-CMOS, RGB
Electrical characteristics
Sensitivity
F12 with 1080/59.94i
F13 with 1080/50i
(at 2,000 lx with 89.9% reflectance)
F13 with 1080/50i
(at 2,000 lx with 89.9% reflectance)
Signal-to-noise ratio
-62 dB
Geometric distortion
Negligible (not including lens distortion)
Optical system specifications
Spectrum system
F1.4 prism
Built-in filters
1: CLEAR, 2: 1/4ND, 3: 1/16ND, 4: 1/64ND
Input/output connectors
CCU
Electro-optical connector (LEMO 3K.93C connector) (x1)
LENS
12-pin (x1)
VF
20-pin (x1)
MIC 1 IN
XLR 3-pin, female (x1)
AUDIO IN CH1, CH2
XLR 3-pin, female (x1 each)
AUDIO switch for MIC: –60 dBu (can be selected up to –20 dBu in the menu), balanced
AUDIO switch for LINE: 0 dBu, balanced
AUDIO switch for MIC: –60 dBu (can be selected up to –20 dBu in the menu), balanced
AUDIO switch for LINE: 0 dBu, balanced
INTERCOM 1, INTERCOM 2
XLR 5-pin, female (x1)
EARPHONE
4-pole mini jack (x1), (2-pole mono, 3-pole stereo, 4-pole CTIA standard, 4-pole OMTP standard)
DC IN
XLR 4-pin (x1), DC 10.5 to 17 V
DC OUT
4-pin (x1), DC 10.5 to 17 V, max. 0.5 A*¹, 2-pin (x1), DC 10.5 to 17 V, Max. 2.5 A*¹
SDI 1
BNC (x1)
SDI 2
No
SDI MONI
BNC (x1)
TEST OUT
BNC (x1)
PROMPTER/GENLOCK
BNC (x1)
PROMPTER 1 Vp-p, 75 Ω
GENLOCK HD: SMPTE ST274, tri-level sync, 0.6 Vp-p, 75 Ω, SD: Black burst (NTSC: 0.286 Vp-p, 75 Ω/PAL: 0.3 Vp-p, 75 Ω)
PROMPTER 1 Vp-p, 75 Ω
GENLOCK HD: SMPTE ST274, tri-level sync, 0.6 Vp-p, 75 Ω, SD: Black burst (NTSC: 0.286 Vp-p, 75 Ω/PAL: 0.3 Vp-p, 75 Ω)
PROMPTER2
No
RET CTRL
6-pin (x1)
REMOTE
8-pin (x1)
TRACKER
12-pin (x1)
CRANE
No
USB
USB 2.0 Type A 4-pin (x1) (for connecting USB drive)
Supplied accessories
Before Using This Unit (1), Operating Instructions (CD-ROM) (1), Cable clamp belt (1 set), Screws (+B3×8) (2), Attached label (1), Camera number label (1)